1) An electrical vibrator with a step-down transformer
2) A setup board
3) A set of elastic strings of different mass per unit length
4) A meter scale

1) Three identical soft massive springs
2) A retort stand with a clamp and a bosshead
3) A set of calibrated masses with hooks
4) A long and heavy retort stand with clamps and bossheads
5) A mechanical vibrator
6) A digital non-contact type tachometer
7) A DC regulated variable power supply
8) Two connecting cords
9) A digital stopwatch
10) A measuring tape (200.0 cm)
11) A measuring scale (60.0 cm)

1) A plastic track fixed on an aluminum base
2) Two stands of different heights
3) Two detectors mounted on the aluminum base
4) A small electromagnet
5) A power supply for the electromagnet
6) A digital timer unit (for the inclined track)
7) Two highly polished, solid, spherical, steel balls
8) A meter scale and a measuring tape (300.0 cm)
9) A long retort stand with a plastic box
10) A small electromagnet clamped at the top of the retort stand
11) Two C-shaped detectors
12) A digital timer unit (for free fall)

1) A plastic track fixed on an aluminum base
2) Two stands of different heights
3) Two detectors mounted on the aluminum base
4) A small electromagnet
5) A power supply for the electromagnet
6) A digital timer unit (for inclined track)
7) Two highly polished, solid, spherical, steel balls
8) A meter scale and a measuring tape (300.0 cm)
9) A long retort stand with a plastic box
10) A small electromagnet clamped at the top of the retort stand
11) Two C-shaped detectors
12) A digital timer unit (for free fall)

1) A physical pendulum mounted on a stand
2) A digital timer unit with a detector
3) Two stainless steel measuring scales (15.0 cm and 60.0 cm)
4) A strong disc magnet mounted on a stand

1) A physical pendulum
2) An aluminum stand for the physical pendulum
3) A digital timer unit with a detector
4) A disc magnet with its stand
5) A set of acrylic discs and cylinders
6) A spirit level
7) An aluminum cone
8) A micrometer screw gauge

1) Three hollow cylindrical pipes each one made of a different material
2) Three small solid cylinders (magnets)
3) A Retort stand with clamps and bossheads
4) Three plastic boxes with memory foam at the base
5) A digital stopwatch
6) A meter scale

1) A disc and magnets assembly
2) A velocity measurement unit with detector
3) Two pairs of magnets fixed on identical mounts
4) A set of slotted masses with a hanger
5) A micrometer screw gauge
6) A vernier caliper
7) A set of acrylic discs of different thickness
8) A meter scale and a measuring tape (200.0 cm)
9) A spirit level

1) A two coil transformer
2) An AC source
3) Four digital multimeters
4) An incandescent lamp with a holder
5) Two fixed value resistors
6) Connecting cords

1) A two coil transformer
2) A three coil transformer
3) Four digital multimeters
4) An AC source
5) Two sets of variable resistors
6) Two resistor ladders
7) Two incandescent lamps with holders
8) Fixed value resistors
9) Connecting cords